Home > Service > Frenquently ask question
Frenquently ask question
  • Time:2015/08/25DSC 971 error messages

    During processing, if the machine encounters a problem, an error message will be displayed. The machine spindle will then be raised to its safety height.  Press “ESC” key to go to the main menu to find out the problem and restart the job.  The machine must be restarted by turning it off and then on.

    Error 1:System error

    Error 2:Job buffer empty  

     
    Error 3X out of range.
    In the file, the X is larger than the machine size.

    Error 4Y out of range.
    In the file, the Y is larger than the machine size.

    Error 5Z out of range.
    In the file, the Z is larger than the machine size.

    Error 6code buffer empty

    Error 7: File Error

    Error 8:Code error oxff

     

    Error 9:System error please restart 

    Error 10:System error please restart feedrate overflow

  • Time:2015/08/25DSC-971 warning messages

       DSC-971 WARNING MESSAGES

      

    1. No Job File

    2. Open File Error

    3. No USB Disk

    4. Sensor Error

    5. File Has Changed

    6. Job Completed

    7. Line Out Of Range

    8. File Error

    9. Write Memory Error

    10. Memory Id Error

    11. Verifying Ok

    12. Verifying Failed

    13.Verifying

    14. Memory Overflow

    15. File Type Error

    16.Ok Restart

    17.Failed Contact Us

    18. Z Out Of Range

     

     

  • Time:2015/08/25DSC-931 error messages

    During processing, if the machine encounters a problem, an error message will be displayed. The machine spindle will then be raised to its safety height. Press “ESC” key to go to the main menu to find out the problem and restart the job. The machine must be restarted by turning it off and then on.
     

    5.1 Errors
    Error 1: System Error. Please contact ROC-Mese.
    Error 2: Job Buffer Empty. The job is empty.
    Error 3 X out of range.
    Error 4Y out of range
    Error 5Z out of range
    Error 6: Code Buffer Empty
    Error 7: File Error
    The file has no data or the job is empty.
    Reason 1The code is incorrect in the file.
    Reason 2The speed is too fast, the feed rate speed must be lowered. Restart the job after
    this.
    Error 8: Code Error Oxff
    Inside the file, some of the code is incorrect.
    Reason 1The original file had errors in the code.
    Reason 2USB Disk has a virus and has corrupted the file. The USB disk must be
    reted and the files must be recopied.
    Reason 3Internal memory chips have a problem. Main board must be changed.
    Error 9: System Error Please Restart
    Error 10: System Error (Feed rate Overflow

     

www.bsgje.com
友情链接:幸运蛋蛋开户  幸运蛋蛋官方网址  幸运蛋蛋登陆  幸运蛋蛋投注  幸运蛋蛋是真的吗  幸运蛋蛋官网  幸运蛋蛋官网  幸运蛋蛋手机官网  幸运蛋蛋导航网  幸运蛋蛋网站